|
The Bantam eSTATION BC6 is a sophisticated microprocessor controlled programmable battery charger, discharger, analyzer, cell balancer, and conditioner with USB PC communication capability. The BC6 is designed to work with NiCd, NiMH, Li-ion, Li-Poly, and Lead acid batteries.
There are plenty of clones out there with similar functionality, the Bantam BC-6 stands out in the industry with exceptional build quality and performance. If you are serious about charging, balancing, analyzing, the Bantam BC6 is the answer.
User notes: The BC6 has temperature sensing capabilities although the temperature sensor uses the same connection port as the USB connection, therefore it is not possible to use temperature sensing while the BC6 is connect to a PC for USB data transfer to the eSTATION software. The Bantam BC6 manual (see link to manual below) is fairly complete, if you have questions about the features or functionality please contact us and we will do our best to answer your questions.
Specifications:
Input voltage: DC 11~18 volts or AC 100~240V, 50/60Hz
Charge/discharge power max.: 50/5 Watts
NiCd/MH: 1~15 cells in series
LiIo/LiPo/LiFe: 1~6 cells series
Pb: 2~20V
Charge current:0.1 to 5.0A
Discharge current: 0.1 to 1.0A
No. of cycle: 1 to 5 times
Program memory settings: 5
Weight: 960g
Dimension: 160x120x40 mm
Features
Lithium battery voltage type: LiIo:3.6V, LiPo:3.7V, LiFe:3.3V
NiCd Delta-peak voltage sensitivity: 5 to 20mV
NiMH Delta-peak voltage sensitivity: 5 to 20mV
Battery temperature cut-off: 20 to 80C or OFF
Rest time between charge/discharge cycles: 1 to 60 min.
Integral timer limit for safety: 10 to 720 min.or OFF
Maximum charging capacity limit for safety: 10 to 9990mAh or OFF
Key beep and buzzer sound: ON/OFF
Input DC power low alert: 10 to 11V
Click here to view the BC6 Manual in PDF format
The BC6 comes stock with a single set of 4mm gold banana plug with silicon cable and alligator clips for charging (part number EA117). Additional accessories are required to utilize all features such as cell balancing and temperature measurement. Many adapters are available for direct connection to hobby industry standard pack connectors. The basic connectors are as follows:
EAC200: USB adapter and eSTATION software for PC viewing and data logging.
EAC120: 8-pin cable for individual cell connection and balancing
EAC110: Temperature sensor cable
| Available Options: |
| EAC110 Temperature Sensor: |
|
| EAC120 Cable assemble for Cell b: |
|
| EAC200 USB interface with eSTATI: |
|
|
FLASHLIGHT
BATTERY CHARGERS
