|
This UF602c is a very compact flashlight with simple which operates in a current regulated single mode (High/off) reverse clicky tail cap button. This model is designed specifically for use with 3.7 volt rechargeable CR123 Lithium Ion batteries also know as LIR123 and 16340. This light comes stock with a standard 17mm driver board utilizing 2pcs 7135 current driver and can be easily modified for adding modes, operating on different battery types or upgrade the emitter. Check our DIY catagory for optional driver boards and emitters. OPTIONAL: This light can be purchased now with optional UI driverboards installed to provide light output modes. You may select you board from the options at the bottom of this page. Currently available are a Two level (High 1A/ Low 100mA) or 3 group 19 mode board. Both of these options use the NJG-15 with 3pcs 7135. With these options boards, light output increases to about 125 lumen at high. This wf 602c model features: CREE P4 emitter, estimated 100 lumen output at ~.7ADriver board with dual 7135 current driving IC 1+ hour run time on a single LIR123 battery Water resistant with o-ring seals Aluminum reflector with soft orange peel and glass lens 17mm emitter board (great for mod'ing) Simple easy to operate design with single mode reverse clicky tail cap Compact size at just under 3 inches or 7.7cm and 21mm diameter Lanyard included
| Available Options: |
| Driver Board: |
|
|
FLASHLIGHT
Flashlights
